ProductModel: | BR-PV-OMS |
Classification: | IEC 61215-2-2021 Series |
RetailPrice: | 0 |
★ Product launched: 2009 ★ Earliest user: Solar Enertech ★ Other users: CTTL, CCIC-CSA, BJSPI, CEPREI, Trina, Jinko, Risen, SSRC, SGS-CSTC, SQI, Ingeer, LERRI, XMQI, CCIC-SET, IEECAS...
1. Test item
1. Pre-exposure test 2. Light Soaking 3. Hot-spot Endurance 4. NMOT 5. Performance at NMOT 6. Measurement of temperature coefficients 7. Temperature test 8. Outdoor exposure test (with MPPT) 9. Initial stabilization (IEC 61215-2:2016) 10. LID (IEC 60904.11)…
2. I-V measurement system
Speed I-V sweep: 10ms~1000ms (arbitrary setting)
Multi-sections variable speed I-V sweep: for high capacitance modules measurement
Three modes of I-V measurement:
(1) Single channel single measurement for maximum power determination
(2) Single channel repeat measurement for temperature coefficients
(3) Multi channel cycle measurement for outdoor array
3. Micro-inverter
Used for: Stabilization, NMOT, temperature test
Input current: about 10A for C-Si or 3A for thin-film...
4. Weather station
(1) Radiation (inclination adjustable)
Response time (95%): < 1s
Spectral range: 300~1100nm
(2) Ambient temperature
Measuring range: -50 … 60°C
(3) Wind speed
Measuring range: 0 … 90m/s
(4) Wind direction
Measuring range: 0 … 359.9°
5. Operating software and hardware
(1) Initial stabilization and outdoor exposure test
Irradiation: 5/10/60KW·h/m² or software setting (MPPT: micro-inverter)
(2) NMOT
Invalid data is automatically filtered: refer. IEC 61853-2:2016
(3) Temperature test
16-channel temperature sensor: Uncertainty ±1°C or better
6. Test rack
... ...