Low-Temperature Dynamic Mechanical Load Tester Product overview：

1. Mechanical Load Tester

-- Effective tested area (module size): 2200×1200mm (L×W)

-- Loading range: -5000~+12000Pa

2. Meet the following tests conditions

-- IEC 62782:2016
    Dynamic: ±1,000Pa, 1,000Cycles, 3~7Cycles/min
-- IEEE 1262-1995
    Dynamic: ±1,440Pa, 10,000Cycles, ≤20Cycles/min
    Static: 2400Pa, 30min
-- VDE-QT-PV-001:2012
    Dynamic: ±1,000Pa, 1,000Cycles, 0.1~1Hz
    Static: Superstrate2400Pa·1h×2+5400Pa; Substrate 2400Pa·1h×3
-- IEC 61215-2:2016
    Static: Superstrate 2400Pa·1h×2+5400Pa; Substrate 2400Pa·1h×3
-- UL 1703-2015
    Static: 2200Pa, 30min…

3. Control type

-- PLC + Industrial control touch screen

-- Air cylinder, cupule, pressure sensor: 55 set (margin & spacing < 200mm) (Each cupule controled by a cylinder and a pressure sensor)

-- 55 pcs vacuum cupules, between cupules is adjustable, all universal frame, assure uniformity on the surface of module after deflect. ensure 55 pressure points uniformly.

-- For IEC 62782:2016 "To ensure a similar effect to the module, the maximum, perpendicular, center-to-center distance between evenly loaded points shall be 20cm or less. If one piston consists of multiple loading points this maximum distance refers to both the loading points within and between pistons. The maximum perpendicular distance between the module frame and an evenly loaded point shall also be 20cm or less.

4. Monitoring system of the electrical continuity

5. Degree of module deflection measurement system (IR sensor)

6. Tester divided design for low temperature test
-- Air cylinder electric heat and keep warm system