Impulse Voltage Generator Product overview：

1. Impulse Voltage Generator

    Test condition: Crystal silicon module on load

    The test equipment and procedure shall comply with IEC 60060-1.

    Front time T1: 1.2μs±30% (with 60/72 cells module)

    Pulse width T2: 50μs±20% (with 60/72 cells module)

    Pulse voltage: 0.1~24KV (with 60/72 pcs module)

    Multiplication factor: 1.48

    Rated working altitude: 4001~5000m

    Voltage deviation range: ±5%

    Pulses output mode: manual or automatic

    Shielding box: The impulse voltage is converted to a small voltage to oscilloscope.

2. Copper add conducting glue

    Copper thickness: 0.03~0.05mm (total thickness 0.05~0.07mm)

    Conducting glue conductivity<1Ω@625mm2

3. Oscilloscope

    Measurement the time of T1 and T2